PVS-69 gen 2 build tutorial

Hey guys sorry this took so long to upload but this is the build tutorial for the PVS-69 gen 2

The files can be found here.
https://www.thingiverse.com/thing:5205121

If you don’t have a printer you can purchase printed housings on my website
https://vonscherfarms.company.site

Parts you’ll need to buy.

Runcam night eagle 3
https://www.amazon.com/dp/B09JVG2D5W/ref=cm_sw_r_as_gl_api_gl_i_HAE5FRFY0P8B49A03FXY?_encoding=UTF8&psc=1&linkCode=ml2&tag=vaughngina-20

Adafruit 2” tft. Part number 911
https://www.adafruit.com/product/911

These displays are usually out of stock you can substitute for the display in the fly sight FPV watch. It has to be the black watch though.

Google cardboard VR glasses
https://www.amazon.com/dp/B07G6YMC63/ref=cm_sw_r_as_gl_api_gl_i_BAXJR1HBRP4NV5J1E20J?_encoding=UTF8&psc=1&linkCode=ml2&tag=vaughngina-20

DC female jack
https://www.amazon.com/dp/B082GHXS1Q/ref=cm_sw_r_as_gl_api_gl_i_JF5D5J4Z6EASEEKS2KNQ?_encoding=UTF8&psc=1&linkCode=ml2&tag=vaughngina-20

DC power cord
https://www.amazon.com/dp/B09573KNGW/ref=cm_sw_r_as_gl_api_gl_i_VPCGYPXTYCM7CV645FWQ?_encoding=UTF8&psc=1&linkCode=ml2&tag=vaughngina-20

Some metric nuts and bolts
https://www.amazon.com/dp/B08K8LMZFL/ref=cm_sw_r_as_gl_api_gl_i_BGV3MT252C0FKGWDKTF6?_encoding=UTF8&psc=1&linkCode=ml2&tag=vaughngina-20

For a power source you can get pretty diverse. There are lots of drone batteries out there that can work. I recommend to stay at or below 7 volts. And get the higher mAh rating you can as that equals battery life.

https://www.amazon.com/dp/B08LZ8L4YD/ref=cm_sw_r_as_gl_api_gl_i_1FZWAJTBJMDCN3YM9XHQ?_encoding=UTF8&psc=1&linkCode=ml2&tag=vaughngina-20

This is the battery pouch I run on my helmet allowing me to switch batteries easily.

https://www.amazon.com/dp/B09B577YHT/ref=cm_sw_r_as_gl_api_gl_i_16ZQHT0K33MRBVWFYKMG?_encoding=UTF8&psc=1&linkCode=ml2&tag=vaughngina-20