EMAX Babyhawk Micro - 3S Will it BURN?

For a ARTF 85MM quad, this thing is a beast. I've been running 3s on the Babyhawk for several weeks now, yet I was being a little timid on the power, thinking the ESCs would ignite at any moment. Today I opened it up and tried to smoke the 6A ESCs...

I have beat the living heck out of this little quad over the last few weeks, several hard crashes, four torn wires, this thing just will not give up the ghost. Excuse the rough flying, there were some gusts, and I was flying with a lot of throttle.

I made the DSHOT Mod: https://www.phaserfpv.com.au/blogs/blog/how-to-enable-dshot-on-emax-babyhawk

Purchase one here: http://pirofliprc.com/BABYHAWK--85MM-BRUSHLESS-DRONE_p_3928.html

I'm using Bonka 360mah 3S batteries.

And here are my current settings:
# Betaflight / SPRACINGF3EVO 3.1.7 Apr 3 2017 / 22:28:08
resource MOTOR 4 A15
resource PPM 1 NONE
resource SERIAL_RX 2 NONE

feature -RX_PPM
feature -TELEMETRY
feature -CURRENT_METER
feature -RSSI_ADC
feature -BLACKBOX
feature -TRANSPONDER
feature -SDCARD
feature RX_SERIAL
feature AIRMODE
feature FEATURE_ANTI_GRAVITY
map TAER1234
serial 2 64 115200 57600 0 115200
aux 0 0 1 900 1300
set rssi_channel = 16
set digital_idle_percent = 4.000
set motor_pwm_protocol = DSHOT600
set serialrx_provider = SBUS
set acc_hardware = NONE
set pid_process_denom = 1
profile 0

set d_lowpass_type = PT1
set anti_gravity_gain = 6.000
set d_setpoint_weight = 50
set p_pitch = 40
set i_pitch = 42
set d_pitch = 33
set p_roll = 39
set d_roll = 32
rateprofile 0
rateprofile 0

set rc_rate = 96
set rc_rate_yaw = 96
set roll_srate = 83
set pitch_srate = 83
set yaw_srate = 83
set tpa_rate = 25